Trail-tech REPLACEMENT OEM KICKSTAND 5310-00 Bedienungsanleitung PDF herunterladen

STEP 1

Place bike on stand. Unbolt factory kickstand arm and re-

move from bike. Remove OEM shim from kickstand

mounting boss on bike frame. Save for reinstallation

later.

STEP 2

Unscrew spring hanger from factory kickstand arm.

Replace the old screw using the supplied M5 screw. Do

not bend or damage the spring hanger.

STEP 3

Install spring hanger on new arm, ensuring proper spring

hanger orientation. (See picture) IMPORTANT- Thread-

locker MUST be used on this bolt. Torque to 5-7 Nm (45-

62 in-lbs).

STEP 4

Place new kickstand leg on frame boss. The leg will not

seat fully due to paint on the mounting boss. Loosely

thread supplied M8 kickstand pivot bolt into frame boss

(finger tight). Rotate the kickstand arm through its travel

while slowly threading in the pivot bolt. Repeat process if

necessary until arm rotates freely without sticking.

010-ELV-166

Tech Support: 360-687-4530

[email protected]

KTM OEM Replacement Kickstand Leg

Frame Boss

Frame Face

Shim

1 2

Inhaltsverzeichnis

Seite 1 - Tech Support: 360-687-4530

STEP 1 Place bike on stand. Unbolt factory kickstand arm and re-move from bike. Remove OEM shim from kickstand mounting boss on bike frame. Save for r

Seite 2

STEP 5 Reinstall OEM shim. Install kickstand arm and pivot bolt; do not install spring or apply thread locker to bolt yet. Torque to approximately 30

Kommentare zu diesen Handbüchern

Keine Kommentare

Trail-tech REPLACEMENT OEM KICKSTAND 5310-00 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Motorräder Trail-tech REPLACEMENT OEM KICKSTAND 5310-00 herunter. Trail Tech REPLACEMENT OEM KICKSTAND 5310-00 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Motorräder Trail-tech REPLACEMENT OEM KICKSTAND 5310-00