Trail-tech KTM DC WIRE HARNESS KIT S-8300-WK Bedienungsanleitung PDF herunterladen

KTM DC CONVERSION HARNESS

INSTALLATION

SUMMARY & BENEFITS:

This installation is applicable to Trail Tech HID headlight installation, as well as general DC conversions.

• The included wiring harness is a modiﬁed OEM KTM part. It includes connections for the battery, reg/rec, stator, headlight, tail

light, computer and

power switch.

• This wiring harness is intended to be used with a Trail Tech stator and reg/rec kit only. DO NOT ATTEMPT TO USE THIS

WIRING HARNESS WITH THE STOCK STATOR AND REGULATOR!

BENEFITS:

• PLUG AND PLAY: No cutting or splicing required. Makes a clean installation using factory KTM connectors.

• The installation is completely reversible.

• The wire harness can be used with the Trail Tech battery 040-BATT3.7, or the Yuasa battery YTX4L-BS (Both sold separately)

PARTS:

Continued on other side >>

REMOVE

BOLT TO

UNINSTALL

STOCK

REG/REC

010-ELV-43

KTM DC HARNESS

Tech Support: 360-687-4530

[email protected]

Wire Harness

Included with the kit are the following:

• Wire Harness

• Battery Ground Strap (w/ bolt and washer)

• Battery Ring Terminal Adapters

• Battery Mount Box (w/ 3 screws)

• Handlebar Mounted Switch

• Reg/Rec Bolt (M5x10mm SHCS)

INSTRUCTIONS:

STEP 1: Begin by laying out the wiring harness and familiarizing yourself with the connectors. When installed, the Head Light,

Computer, and

Light Switch connectors will be located in front the of the steering stem. The Stator and Reg/Rec connectors, as

well as the Ground ring terminal, will be located under the gas tank. The Tail Light and Battery + connectors will be located in the

air box.

STEP 2:

Remove the seat, gas tank, head light or number plate, and left side air box cover from the motorcycle. Remove the

stock lighting wire harness if equipped.

Head Light

Light

Switch

Computer

Power

Stator

Reg/Rec

Battery

Positive (+)

Tail Light

Ground

Ring Terminal

1 2 3 4

KTM DC CONVERSION HARNESS 1

Inhaltsverzeichnis

Seite 1 - KTM DC CONVERSION HARNESS

KTM DC CONVERSION HARNESSINSTALLATIONSUMMARY & BENEFITS:This installation is applicable to Trail Tech HID headlight installation, as well as gener

Seite 2

KTM DC CONVERSION HARNESSINSTALLATIONINSTALLATION CONTINUED:STEP 3: Install the battery in the battery box. If using the Trail Tech 040-BATT3.7, use

Seite 3

KTM DC CONVERSION HARNESSINSTALLATIONINSTALLATION CONTINUED:STEP 7: Route the head light, computer, and switch connectors to the right side of the fra

Seite 4

KTM DC CONVERSION HARNESSINSTALLATIONINSTALLATION CONTINUED:STEP 10: Zip-Tie the harness to the frame as needed using the remaining ties.010-ELV-43KTM

Kommentare zu diesen Handbüchern

Keine Kommentare

Trail-tech KTM DC WIRE HARNESS KIT S-8300-WK Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Motorräder Trail-tech KTM DC WIRE HARNESS KIT S-8300-WK herunter. Trail Tech KTM DC WIRE HARNESS KIT S-8300-WK User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Motorräder Trail-tech KTM DC WIRE HARNESS KIT S-8300-WK